Build your next best semi auto rifle with options GrabAGun offers, like the KE Arms KP-15 Polymer Stripped Reciever. This receiver is for a future 5.56 KP-15 rifle; the stripped receiver features a reliable stock and pistol grip. This system is also compatible with Mil-Spec Fire Control Groups and cassette style match triggers, including KE Arms DMR and SLT. Order the KE Arms KP-15 Polymer Stripped Reciever from GrabAGun today!
New in Box
Finish Per Color
Flat Dark Earth
Manufacturer Part Number
KP-15 Polymer Stripped Reciever
KP-15 Polymer Stripped Reciever Features The KP-15 is a monolithic polymer AR15 style receiver made from injection molded 30% glass filled nylon incorporating the buttstock, buffer tube, pistol grip, and trigger into the receiver design as integral components. KP-15 Polymer Stripped Reciever Specifications The KP-15 receiver uses a Carbine buffer and spring. Do NOT use anything other than standard carbine buffers and round springs or the JP SCSS in the KP-15. The Take Down and Pivot Pins have the detents built into them; eliminating the spring and detent holes in the lower increases durability. The buffer detent (should you choose to use it) is held in place with a 5/64â€ Roll Pin The KP-15 is compatible with all Mil-Spec Fire Control Groups The KP-15 is compatible with cassette style match triggers including the KE Arms DMR and SLT units. The retention system of these triggers with D-Clips in the bushings to retain the fire control pins makes them better suited for use in the KP-15 than other designs thequire captured pins.* The hammer pin area is wider for durability; Standard AR15 hammer pins can still be used but we offer a longer hammer pin for customers preferring a flush pin for aesthetic reasons. Safety selector spring and detent load from the top and then the selector is slid over them. Standard selectors can work but removing them can be particularly difficult. We recommend the use of our optimized mil-spec selector or optimized ambi selector to make removal easier. Follow our assembly guide for further instructions. The KP-15 is compatible with standard AR15 uppers in calibers including .223/5.56mm NATO, .300 Blackout, 7.62x39mm, 6.5mm Grendel, 6.8mm SPC, .350 Legend; make sure you use the appropriate weight carbine buffer for your rifle to eject casings at 3:00-4:00. The KP-15 is compatible with 9mm blowback systems with a 5.4oz carbine buffer minimum. Use heavier buffers as long as your gun can cycle reliably. Failure to use this minimum buffer weight can damage the lower. Big Bores: .450 Bushmaster, .458 SOCOM, .50 Beowulf, .50 BMG: We will never test these calibers enough to guarantee function and durability over time; use at your own risk.